To log the cache you must visit a number of locations in sequence.
At each location you will find a landmark with a few words on it.
The position of the next landmark can be determined by decoding the
landmark as explained below. When you have
visited all the locations you will also be able to find two code
words which will enable you to log the cache.
There is a car park at N 51° 18.782',E 0° 11.303'.
All the landmarks can be reached via public paths, roads or
parks.
The path to the first landmark (it starts at N 51° 18.713',E 0°
10.877') does however cross a farm field which can be extremely
muddy at times, and often has livestock in it. Dogs need to be kept
on a lead.
There are two routes you can take to log this cache. The scenic
route is longer and trickier. The express route misses out most of
the cross-country walking and visits fewer locations. You could log
one or both routes. If you want to log both, then I'd suggest you
visit both the express and scenic start locations before going on
to the rest.
The Scenic Route
- N 51° 19.141',E 0° 10.391' Template:
"?#.@+............."
- N 51° 18.?+2',E 0° 10.@#2' Template:
".@.#?..+.........."
- N 51° 18.?++',E 0° 11.@7#' Template:
"+.?.%@#..........."
- N 51° 18.?+%',E 0° 11.@#6' Template:
".+...#?%@........."
- N 51° 18.?+%',E 0° 11.@#6' Template:
".@..#?.%.+........"
- N 51° 18.?+%',E 0° 11.@#?' Template:
".+.@#............."
- N 51° 18.9+1',E 0° 11.@#7' Template:
"?.#+..@..%........"
- N 51° 18.?+%',E 0° 11.@?#' Template:
"...@.............."
The Express Route
- N 51° 18.659',E 0° 10.589' Template:
".#?@.............."
- N 51° 18.?12',E 0° 10.@#2' Template:
"#.@.?...+........."
- N 51° 18.?+?',E 0° 11.@#6' Template:
"..*+.@#.%..?......"
- N 51° 18.?+%',E 0° 11.@#*' Template:
"?#...+@..........."
- N 51° 18.?+1',E 0° 11.@#6' Template:
"....@............."
Decoding the landmarks
This is the key you will need to turn letters into digits (see
step 3 below).
|A|B|C|D|E|F|G|H|I|J|K|L|M|N|O|P|Q|R|S|T|U|V|W|X|Y|Z|
|-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-|
|2|7|1|0|8|6|0|9|9|3|4|8|9|3|1|7|6|8|5|8|4|2|5|6|2|5|
The position of the next landmark can be found in this way:
- Arrange the words from the landmark in alphabetical order with
no spaces between them.
For example, if the words were "Roman burial ground" then the
required string of letters would be "BURIALGROUNDROMAN".
- Look at the template and extract the letters from the string
corresponding to the code characters. The dots (".") in the
template represent letters that do not need decoding. (The template
may well be longer than the string of letters it decodes, but will
not have code characters beyond the end of the string.)
For example, if the string was "BURIALGROUNDROMAN" and the template was
"...%..#...@*..?.+." then %=I, #=G,
@=N, *=D, ?=M and +=N.
- Turn the letters into digits using the decoding key above.
In this example, %=I=9, #=G=0, @=N=3, *=D=0, ?=M=9 and
+=N=3.
- To find the position of the next landmark, determine the digit
associated with each letter, and place that digit into the
appropriate position in the in-complete co-ordinates.
For example, if the incomplete co-ordinates were N 51° 18.?+%',E 0° 11.@#*' then the completed
co-ordinates would be N 51° 18.939',E 0°
11.300'
When you have found all the landmarks for a route, including the
final one, you can find out the code word by taking the letters
identified by "@" in each template, and placing them in sequence
starting with the one from the first location.
To log the cache:
- Make sure you are using CAPITAL LETTERS for the code
word.
- Put the code word in place of the "===" in this URL:
http://www.lazyleopard.org.uk/===.html
(If the code word were "XYZZY" then the URL would become
http://www.lazyleopard.org.uk/XYZZY.html)
- go to the page that URL points to, and fill in the form you'll
find there.
- Don't forget to add an entry to this cache page!
Have fun!
