Klaipeda Strait
Task
To log the cache, send me the answers to the following question.
1. reference point 1 (information panel): What is the grain size of the sand in this region and what form of erosion has shaped the landscape (2 forms are wanted)?
2. reference point 2 (Memel Deep): Do a small field experiment. Go to any point on the Memel Deep and measure the current velocity in m/s (less than 1 is also possible), direction (to/from the Baltic Sea) and coordinates of your experiment.
Please do not throw any rubbish into the water for the measurement. Be creative and use twigs or leaves, for example.
3. Upload pictures in the log showing the experiment and that you were there. It must be recognisable in at least one picture that you (geocacher name or as a person in the picture) were there and how you carried out the experiment. Of course, pictures of great landscapes and your experiences are always welcome.
Description
At the northern end of the Curonian Lagoon, the Klaipeda Straight is the only connection between the Baltic Sea and the lagoon. A lagoon is an area of brackish water separated from the main part of the sea by a spit or offshore islands. The lagoon belongs to the inner coastal waters.
A spit is a narrow strip of sand that separates a lagoon from the open sea. Spits are typical of tideless seas such as the Baltic Sea. The part largely separated from the sea by the spit is increasingly sweetened by freshwater inflow and on the other hand there is only a slight exchange of water with the open sea. The point at which tributaries break through the spit and flow into the open sea is called a deep or strait. In the case of a closed spit, the separated body of water is called a lagoon.
Historically, the opening, the Klaipeda Strait, was repeatedly closed by erosion, e.g. by storms. Sand and other sediments were washed into the estuary by wind and currents. This made it difficult to operate a harbour in this area. Long breakwaters were built around 1900 to ensure and protect shipping. Since then, the depth of the harbour has been constantly deepened. This means that the harbour has to be constantly cleared of new sediment.
Some figures and facts about Klaipeda Strait:
- Length: 12km
- Width: 1.500m
- Depth: 15m
- Depth in average: 3.8m
The sediments in the Klaipeda Strait consist mainly of sand. Grain sizes of sand can vary from 0.05 mm (extra fine sand) to 2 mm (extra coarse sand). Sizes >2 mm are referred to as gravel or crushed stone. The size is an indicator for the formation of the sand, as well as the source, the type of transport and the type of dunes formed. The following distinctions are made:
- 2-1mm - extra-coarse sand
- 1-0,5mm - coarse sand
- 0,5-0,25mm - medium sand
- 0,25-0,1mm - fine sand
- 0,1-0,05mm - extra fine sand
Klaipėdos sąsiauris
Task
Tam, kad galėtumėte užregistruoti šio geolobio radimą, visus šiuos atsakymus (tik angliškai) nusiųskite:
1. 1 atskaitos taškas (informacinis skydelis): Kokio dydžio yra šio regiono smėlio grūdeliai ir kokia erozijos forma suformavo kraštovaizdį (pageidautinos 2 formos)?
2. 2 atskaitos taškas (Memelio gelmės): Atlikite nedidelį lauko eksperimentą. Nuvykite į bet kurį Memelio gelmių tašką ir išmatuokite srovės greitį m/s (galima ir mažesnį nei 1), kryptį (į Baltijos jūrą ir iš jos) ir eksperimento koordinates.
Prašome nemėtyti šiukšlių į matuojamą vandenį. Būkite išradingi ir naudokite, pavyzdžiui, šakeles ar lapus.
3. Į žurnalą įkelkite nuotraukas, kuriose matytųsi, kaip bandyta atlikti bandymą ir kad ten buvote. Bent vienoje nuotraukoje turi būti atpažįstama, kad ten buvote jūs (geocacherio vardas ir pavardė arba nuotraukoje esantis asmuo) ir kaip atlikote bandymą. Žinoma, visada laukiamos puikių kraštovaizdžių ir jūsų patirties nuotraukos.
Aprašymas
Šiauriniame Kuršių marių gale esantis Klaipėdos sąsiauris yra vienintelė jungtis tarp Baltijos jūros ir marių. Kuršių marios - tai druskingo vandens plotas, nuo pagrindinės jūros dalies atskirtas nerija arba jūroje esančiomis salomis. Kuršių marios priklauso vidiniams pakrantės vandenims.
Nerija - tai siaura smėlio juosta, skirianti marias nuo atviros jūros. Nerijos būdingos bevandenėms jūroms, pavyzdžiui, Baltijos jūrai. Dalis, kurią nuo jūros daugiausia skiria nerija, vis labiau prisisotina gėlo vandens, o kita vertus, vyksta tik nedidelė vandens apykaita su atvira jūra. Vieta, kurioje intakai prasiveržia pro neriją ir įteka į atvirą jūrą, vadinama giluma arba sąsiauriu. Uždaros nerijos atveju atskirtas vandens telkinys vadinamas lagūna.
Istoriškai Klaipėdos sąsiauris ne kartą buvo uždarytas dėl erozijos, pvz., audrų. Smėlį ir kitas nuosėdas į žiotis plukdė vėjas ir srovės. Dėl to šioje teritorijoje buvo sunku eksploatuoti uostą. Apie 1900 m. laivybai užtikrinti ir apsaugoti buvo pastatyti ilgi molynai. Nuo to laiko uosto gylis buvo nuolat gilinamas. Tai reiškia, kad uostas turi būti nuolat valomas nuo naujų nuosėdų.
Keletas skaičių ir faktų apie Klaipėdos sąsiaurį:
- Ilgis: 12km
- Plotis: 1.500m
- Didžiausias gylis: 15m
- Vidutinis gylis: 3.8m
Klaipėdos sąsiaurio nuosėdas daugiausia sudaro smėlis. Smėlio grūdelių dydis gali svyruoti nuo 0,05 mm (labai smulkus smėlis) iki 2 mm (labai stambus smėlis). Dydis > 2 mm vadinamas žvyru arba skalda. Pagal dydį galima spręsti apie smėlio susidarymą, taip pat apie jo šaltinį, transportavimo būdą ir susiformavusių kopų tipą. Skiriami šie požymiai:
- 2-1mm - Ypač stambių grūdelių
- 1-0,5mm - Stambių grūdelių
- 0,5-0,25mm - Vidutiniško dydžio grūdelių
- 0,25-0,1mm - Smulkių grūdelių
- 0,1-0,05mm - Ypač smulkių grūdelių
Memeler Tief
Aufgabe
Um den Cache zu loggen, schicke mir die Antworten auf die folgenden Frage.
1. Referenzpunkt 1 (Informations Tafel): Welche Korngröße hat der Sand in dieser Region und welche Form der Erosion hat die Landschaft geformt (2 Formen sind gesucht)?
2. Referenzpunkt 2 (Memeler Tief): Mache einen kleinen Feldversuch. Gehe zu einer beliebigen Stelle am Memeler Tiefs und miss die Strömungsgeschwindigkeit in m/s (auch kleiner als 1 ist möglich), Richtung (zu/von der Ostsee) und Koordinaten deines Versuchs.
Bitte schmeiße keinen Abfall ins Wasser für die Messung. Sei kreativ und nutze zum Beispiel Zweige oder Blätter.
3. Lade Bilder im Log hoch in dem der Versuch ersichtlich ist und das ihr vor Ort wart. Es muss auf mindestens in einem Bild erkennbar sein, dass ihr (Geocachernamen oder als Person im Bild) dort wart und wie ihr den Versuch durchgeführt habt. Natürlich sind Bilder von tollen Landschaften und euren Erlebnissen immer willkommen.
Beschreibung
Am nördlichen Ende des kurischen Haffs stellt das Memeler Tief die einzige Verbindung zwischen Ostsee und dem Haff da. Ein Haff ist ein durch eine Nehrung oder durch vorgelagerte Inseln vom Hauptteil des Meeres getrennter Brackwasserbereich. Das Haff gehört zu den inneren Küstengewässern.
Eine Nehrung (von mittelhochdeutsch nare „Landenge“ bzw. litauisch Neringa „hineinstecken“) ist ein schmaler Sandstreifen, der ein Haff vom offenen Meer abtrennt. Nehrungen sind typisch für gezeitenlose Meere wie die Ostsee. Der durch die Nehrung vom Meer weitgehend abgetrennte Teil wird durch Süßwasserzufluss zunehmend ausgesüßt und andererseits besteht nur ein geringfügiger Wasseraustausch mit dem offenen Meer. Die Stelle, an der Zuflüsse die Nehrung durchbrechen und ins offene Meer münden, wird Tief genannt. Bei einer geschlossenen Nehrung bezeichnet man das abgetrennte Gewässer als Lagune.
Historisch wurde die Öffnung, das Memeler Tief immer wieder durch Erosion, z.B. durch Stürme, verschlossen. Dabei wurden durch Wind und Strömung Sand und andere Sedimente in die Mündng gespült. Dies erschwerte den Betrieb eines Hafens in diesem Areal. Um die Schiffahrt sicherzustellen und zu schützen wurden um 1900 lange Wellenbrecher erbaut. Seit dieser Zeit wurde die Tiefe des Hafens konstant vertieft. Dabei muss der Hafen permanent von neuen Sedimenten befreit werden.
Einige Zahlen und Daten zum Memeler Tief:
- Länge: 12km
- Breite: 1.500m
- Tiefe: 15m
- durchschnittliche Tiefe: 3.8m
Die Sedimente im Memeler Tief bestehen hauptsächlich aus Sand. Korngrößen von Sand können varieren von 0,05mm (sehr feiner Sand) bis zu 2mm (sehr grober Sand). Bei größen >2 mm spricht man von Kies oder Schotter. Die Größe ist ein Inidkator für die Entstehung des Sandes, ebenso die Quelle, die Art des Transportes und die Art der entstehenden Dünen. Die folgenden Unterscheidungen werden getroffen:
- 2-1mm - sehr grober Sand
- 1-0,5mm - grober Sand
- 0,5-0,25mm - mittlerer Sand
- 0,25-0,1mm - feiner Sand
- 0,1-0,05mm - sehr feiner Sand
