You will be traveling Here & There & Everywhere to locate the final location. You will need the ability to read QR Codes at the different locations you will visit. Without this capability, you will not be able to locate the final location. When you are at the different locations gathering/reading the QR Code for the next location, do not remove the QR Code tag or mark on it. All of the QR Code tags are in plain sight and easy to find/see. They are not way, way over your head (one is kind of high) or on the ground. We have attached a sample of the QR Code you will be reading for you to test your electronic device to see if you can read it. If you are able to read N28 53.454 W082 29.172 from the QR Code, your device is able to read these QR Codes. Do not go to that location because, you will find nothing there. This is just a test of your QR Code reader.
While on your adventure, you will be traveling on paved roads. Daylight hours may be the best, unless you have a flashlight to illuminate the tag. We have not tried reading the tags in the dark to see if it will work. We tried them in the daylight and they all worked. The journey should take you way less than 1 hour, unless you get lost. It is always best to write down coords and double check them when you enter them into your GPSr. Yes that takes longer and reduces most mistakes. When you arrive at the posted location to start your adventure, look for the QR Code tag for the information about the next location to search for the next QR Code tag for the next location. You will be reading 5 QR Code tags to find the final location. When at the final location, the container is in plain sight. No bush hunt, No feeling under things or on top of things and No climbing or taking apart. It is magnetic.