Another unique creation you wont' have seen anywhere else!
This multi is much easier than some of my others, you don't need to know Morse code, Binary or Braille and no special tools are required! Just simply do what Simon says!!
The displayed coords will take you just a few metres off the bridleway to a "regular" (approx 4L) sized box containing the machine. Follow the instructions below and you will get the coords for the second part which is a film canister sized container just a short walk away.
1. Open the box and remove the machine. (DO NOT try to remove the lid of the machine!)
2. Hold the machine with the white button in the 12 o'clock position. Then press and HOLD this button. This will turn on a small white light to show the machine is working.
3. After about 1 second the small red LEDs will flash a light sequence.
4. Copy the light sequence by pressing the YELLOW buttons in the same order and same number of times that the lights flashed.
5. If you copy the sequence wrongly the big RED LED will flash and shortly the small LEDS will display another sequence. Try again!!
6. If you copy the sequence correctly the big GREEN LED will flash and the coords for the final location will be displayed on the machine BELOW the white button. (The numbers could be hard to read in bright sunshine.)
**** Ensure the white button is kept pressed for the whole operation and PLEASE replaced the lid on the container properly so it remains waterproof.****
Good luck with your quest and I hope you enjoy finding something a bit different as much as I have enjoyed making it!