🇪🇸
Al llegar a GZ observe el "muro" justo al noreste de la carretera. Aquí se pueden observar conglomerados. Los conglomerados son rocas que están compuestas por una fracción sustancial de clastos. Un conglomerado suele contener una matriz de sedimentos de grano más fino, como arena, limo o arcilla, que llena el espacio entre los clastos.
Conglomerados
Los conglomerados se clasifican como rocas sedimentarias. Los conglomerados pueden nombrarse y clasificarse por la cantidad y el tipo de matriz (las partículas entre las rocas o clastos) presente, pero también por el rango de tamaño de las rocas o clastos presentes.
Clasificación matricial: los conglomerados rara vez están compuestos enteramente de clastos (rocas). Normalmente, el espacio entre los clastos (rocas) se llena con una mezcla compuesta de cantidades variables de limo, arena y arcilla, conocida como matriz.
1. Si los clastos (rocas) individuales de un conglomerado están separados entre sí por una gran cantidad de matriz, de modo que no están en contacto entre sí y flotan dentro de la matriz, se denomina soportado por matriz (matrix-supported).
2. Si las rocas de un conglomerado están en contacto entre sí, se le llama clasto soportado (clast-supported).

La clasificación también se puede definir en función del tamaño de sus clastos:
1. Conglomerado granular: un conglomerado compuesto en gran parte por clastos del tamaño de gránulos con un diámetro comprendido entre 2 y 4 mm.
2. Conglomerado de guijarros: un conglomerado compuesto en gran parte por clastos del tamaño de un guijarro con un diámetro comprendido entre 4 y 64 mm.
3. Conglomerados del tamaño de un canto rodado: conglomerado compuesto en gran parte por clastos del tamaño de un canto rodado con un diámetro comprendido entre 64 y 256 mm.
4. Conglomerados del tamaño de rocas: un conglomerado compuesto en gran parte por clastos del tamaño de rocas con un diámetro en el rango >256 mm.

¿Cómo completar este Earthcache?
Cuando se recopilen las respuestas, envíelas al CO. Puede iniciar sesión inmediatamente después de que se envíen las respuestas al CO. Los registros sin respuestas al CO se eliminarán sin previo aviso.
Mire los tres metros inferiores desde el nivel de la calle y responda las siguientes preguntas:
1. ¿Qué porcentaje de los tres metros inferiores está soportado por clastos? ¿10%, 33%, 50%, 67% o 100%?
2. ¿A qué altura se sitúan la mayoría de los clastos? ¿0-1 metros, 1-2 metros, 2-3 metros?
3. ¿Cómo lo caracterizarías según el tamaño de los clastos? ¿Qué tamaño tienen los clastos más grandes de esta capa?
4. OBLIGATORIO: Tomar una foto con un papel con el nombre de su geocache y la fecha, con Moncayo (ubicado al suroeste de GZ) de fondo. ¡POR FAVOR NO INCLUYA FOTOS DE GZ EN SU REGISTRO!
🇬🇧
When arriving at GZ observe the "wall" just to the Northeast of the road. Here you can observe conglomerates. Conglomerates are rocks that are composed of a substantial fraction of clasts. A conglomerate typically contains a matrix of finer-grained sediments, such as sand, silt, or clay, which fills the space between the clasts.
Conglomerates
Conglomerates are classified as a sedimentary rock. Conglomerates may be named and classified by the amount and type of matrix (the particles in between the rocks or clasts) present, but also by the size range of rocks or clasts present.
Matrix classification: Conglomerates are rarely composed entirely of clasts (rocks). Typically, the space between clasts (rocks) is filled by a mixture composed of varying amounts of silt, sand, and clay, known as matrix.
1. If the individual clasts (rocks) in a conglomerate are separated from each other by an abundance of matrix such that they are not in contact with each other and float within the matrix, it is called matrix-supported.
2. If the rocks in a conglomerate are in contact with each other, it is called clast-supported.

Classification can also be defined based on their clast size:
1. Granule conglomerate - a conglomerate composed largely of granule-size clasts with diameter in the range 2-4 mm
2. Pebble conglomerate - a conglomerate composed largely of pebble-size clasts with diameter in the range 4-64 mm
3. Cobble-size conglomerates - a conglomerate composed largely of cobble-size clasts with diameter in the range 64-256 mm
4. Boulders-size conglomerates - a conglomerate composed largely of boulder-size clasts with diameter in the range >256 mm

How to complete this Earthcache?
When answers are collected, send them to CO. You can log immediately after answers are sent the CO. Logs without answers to CO will be deleted without any further notice.
Look at the bottom three meters from street level and answer the following questions:
1. What percentage of the bottom three meters is clast-supported? 10%, 33%, 50%, 67% or 100%?
2. At what height are the most clasts located? 0-1 meters, 1-2 meters, 2-3 meters?
3. How would you characterize it based on the size of the clasts? How big are the largest clasts in this layer?
4. MANDATORY: Take a photo with a piece of paper with your geocache name and the date, with Moncayo (located southwest of GZ) in the background. PLEASE DON'T INCLUDE PICTURES OF GZ IN YOUR LOG!
🇳🇱
Wanneer u bij GZ aankomt, observeert u de "muur" net ten noordoosten van de weg. Hier kunt u conglomeraten observeren. Conglomeraten zijn gesteenten die uit een aanzienlijk deel van de klasten bestaan. Een conglomeraat bevat doorgaans een matrix van fijnkorrelige sedimenten, zoals zand, slib of klei, die de ruimte tussen de klasten opvult.
Conglomeraten
Conglomeraten worden geclassificeerd als sedimentair gesteente. Conglomeraten kunnen worden genoemd en geclassificeerd op basis van de hoeveelheid en het type matrix (de deeltjes tussen de rotsen of klasten) die aanwezig zijn, maar ook op basis van de grootte van de aanwezige rotsen of klasten.
Matrixclassificatie: conglomeraten bestaan zelden volledig uit klasten (gesteenten). Meestal wordt de ruimte tussen klasten (gesteenten) opgevuld door een mengsel dat bestaat uit verschillende hoeveelheden slib, zand en klei, ook wel matrix genoemd.
1. Als de individuele klassen (gesteenten) in een conglomeraat van elkaar worden gescheiden door een overvloed aan matrix, zodat ze niet met elkaar in contact staan en binnen de matrix zweven, wordt dit matrix-supported (door matrix ondersteund) genoemd.
2. Als de rotsen in een conglomeraat met elkaar in contact zijn, wordt dit clast-supported (door klasten ondersteund) genoemd.

Classificatie kan ook worden gedefinieerd op basis van hun klasgrootte:
1. Korrelconglomeraat - een conglomeraat dat grotendeels bestaat uit klasten ter grootte van korrels met een diameter in het bereik van 2-4 mm
2. Kiezelconglomeraat - een conglomeraat dat grotendeels bestaat uit klasten ter grootte van een kiezelsteen met een diameter tussen 4 en 64 mm
3. Conglomeraten ter grootte van kasseien - een conglomeraat dat grotendeels bestaat uit klasten ter grootte van kasseien met een diameter tussen 64 en 256 mm
4. Conglomeraten ter grootte van rotsblokken - een conglomeraat dat grotendeels bestaat uit klassen ter grootte van rotsblokken met een diameter in het bereik >256 mm

Hoe voltooi je deze Earthcache?
Als er antwoorden zijn verzameld, stuurt u deze naar de CO. U kunt direct inloggen nadat de antwoorden naar de CO zijn verzonden. Logboeken zonder antwoorden naar de CO worden zonder verdere kennisgeving verwijderd.
Kijk naar de onderste drie meter vanaf straatniveau en beantwoord de volgende vragen:
1. Welk percentage van de onderste drie meter wordt door klasten ondersteund? 10%, 33%, 50%, 67% of 100%?
2. Op welke hoogte bevinden zich de meeste klasten? 0-1 meter, 1-2 meter, 2-3 meter?
3. Hoe zou je het karakteriseren op basis van de grootte van de klassen? Hoe groot zijn de grootste klasten in deze laag?
4. VERPLICHT: Maak een foto met een vel papier met de naam van je geocache en de datum, met Moncayo (ten zuidwesten van GZ) op de achtergrond. PLAATS GEEN FOTO'S VAN GZ IN UW LOG!