Basaltsäulen - Geolehrpfad Tännesberg
Vor Ort wirst du keine Dose finden.
Log-Bedingungen
Um diesen EarthCache loggen zu dürfen, beantworte bitte folgende Fragen vor Ort. Schicke deine Antworten über den Messenger oder mein Profil an mich. Du brauchst nicht auf eine Logfreigabe zu warten.
Ein Foto von dir oder deinem GPS an den Earthcache-Koordinaten ist notwendig, um den Earthcache zu loggen. Logs ohne Foto werden gelöscht.
- Beschreibe die Form, Farbe und Struktur der Basaltsäule. Wie viele Ecken hat die Form?
- Schätze die Höhe und Breite der größten Säule, die du siehst.
- Erklärt kurz, wie die Basaltsäulen entstanden sind.
Basaltsäulen
Ein Vulkanit ist ein magmatisches Gestein, das durch die schnelle Abkühlung von Lava an der Erdoberfläche entsteht. Im Gegensatz zu Plutoniten, die sich tief in der Erde bilden, sind Vulkanite typischerweise feinkörnig oder glasig, da für das Wachstum größerer Kristalle kaum Zeit bleibt. Beispiele für Vulkanite sind Basalt und Rhyolith. Basalt ist also ein vulkanisches Gestein, das aus dünnflüssigem Magma besteht, welches an die Erdoberfläche tritt. Wenn die heiße Lava abkühlt und erstarrt, zieht sie sich zusammen. Die Kontraktion (Volumenschrumpfung) des erkaltenden Basalts erzeugt Spannungen, die zu Rissen führen.
Diese Schwundrisse breiten sich nach und nach in das Magma hinein aus und trennen es in Säulen. Die Risse folgen meist dem Weg des geringsten Widerstands und der senkrechten Richtung des Wärmeflusses, was zu den typisch sechseckigen Formen führt. Obwohl andere Formen (vier-, fünf-, sieben- oder mehrseitige Säulen) ebenfalls vorkommen können, ist die sechseckige Form besonders häufig und effizient.
Die Säulen verlaufen senkrecht zur Oberfläche, über die die Lava abgekühlt ist. Man kann also die Abkühlungsrichtung anhand der Säulenlage erkennen.
Gut ausgebildete Basaltsäulen zeigen eine beeindruckende Regelmäßigkeit und geometrische Ordnung, was ihnen ein "natürlich gehauenes" Aussehen verleiht.
Diese Basaltsäulen entstanden vor etwa 2,5 bis 66 Millionen Jahren im Tertiär. Ausgelöst wurde der Vulkanismus durch Plattenbewegungen, die zu Dehnung der Erdkruste führten, insbesondere im Zuge der Alpenbildung. Dabei entstanden tiefreichende Bruchsysteme und Grabenstrukturen, entlang derer heißes Magma aus dem Erdmantel aufsteigen und an die Erdoberfläche gelangen konnte. Dies führte zur Bildung zahlreicher Vulkangebiete, z. B. in der Oberpfalz, der Rhön oder im Vogelsberg, wobei die Magmen oft basaltischen Charakters waren.
Bazaltové sloupy – geologická naučná stezka Tännesberg
Na místě nenajdeš žádnou schránku.
Podmínky pro zápis
Abys mohl zaznamenat tento EarthCache, odpověz prosím na místě na následující otázky. Své odpovědi mi zašli přes Messenger nebo přes můj profil. Nemusíš čekat na schválení zápisu.
K zaznamenání Earthcache je nutné přiložit fotografii vás nebo vašeho GPS na souřadnicích Earthcache. Záznamy bez fotografie budou smazány.
- Popište tvar, barvu a strukturu čedičového sloupu. Kolik rohů má tento tvar?
- Odhadněte výšku a šířku největšího sloupu, který vidíte.
- Stručně vysvětlete, jak vznikly čedičové sloupy.
Čedičové sloupy
Vulkanit je magmatická hornina, která vzniká rychlým ochlazením lávy na zemském povrchu. Na rozdíl od plutonitů, které se tvoří hluboko v zemi, jsou vulkanity typicky jemnozrnné nebo sklovité, protože na růst větších krystalů není téměř žádný čas. Příklady vulkanitů jsou čedič a ryolit. Čedič je tedy vulkanická hornina, která se skládá z řídké magmy, která vystupuje na zemský povrch. Když horká láva ochladne a ztuhne, smršťuje se. Kontrakce (objemové smrštění) ochlazujícího se čediče vytváří napětí, které vede k prasklinám.
Tyto smršťovací trhliny se postupně šíří do magmatu a rozdělují ho na sloupy. Trhliny většinou sledují cestu nejmenšího odporu a svislý směr toku tepla, což vede k typickým šestiúhelníkovým tvarům. Ačkoli se mohou vyskytovat i jiné tvary (čtyř-, pět-, sedmi- nebo víceúhelníkové sloupy), šestiúhelníkový tvar je obzvláště častý a efektivní.
Sloupy jsou kolmé k povrchu, na kterém láva vychladla. Směr ochlazování lze tedy rozpoznat podle polohy sloupů.
Dobře vyvinuté čedičové sloupy vykazují působivou pravidelnost a geometrický řád, což jim dodává „přirozeně vytesaný“ vzhled.
Tyto čedičové sloupy vznikly před přibližně 2,5 až 66 miliony let v terciéru. Vulkanismus byl vyvolán pohybem tektonických desek, které vedly k roztažení zemské kůry, zejména v průběhu formování Alp. Vznikly tak hluboké zlomy a příkopové struktury, podél kterých mohlo stoupat horké magma z zemského pláště a dostat se na zemský povrch. To vedlo k vytvoření četných vulkanických oblastí, např. v Horním Falci, Rhönu nebo Vogelsbergu, přičemž magma mělo často bazaltový charakter.
Basalt columns – Tännesberg geological trail
You will not find a container at this location.
Logging conditions
To log this EarthCache, please answer the following questions on site. Send your answers to me via Messenger or my profile. You do not need to wait for your log to be approved.
A photo of you or your GPS at the EarthCache coordinates is required to log the EarthCache. Logs without a photo will be deleted.
- Describe the shape, colour and structure of the basalt column. How many corners does the shape have?
- Estimate the height and width of the largest column you see.
- Briefly explain how the basalt columns were formed.
Basalt columns
A volcanic rock is an igneous rock formed by the rapid cooling of lava on the Earth's surface. Unlike plutonic rocks, which form deep within the Earth, volcanic rocks are typically fine-grained or glassy, as there is little time for larger crystals to grow. Examples of volcanic rocks are basalt and rhyolite. Basalt is therefore a volcanic rock consisting of thin magma that reaches the Earth's surface. When the hot lava cools and solidifies, it contracts. The contraction (volume shrinkage) of the cooling basalt creates tensions that lead to cracks.
These shrinkage cracks gradually spread into the magma and separate it into columns. The cracks usually follow the path of least resistance and the vertical direction of heat flow, resulting in the typical hexagonal shapes. Although other shapes (four-, five-, seven- or multi-sided columns) can also occur, the hexagonal shape is particularly common and efficient.
The columns run perpendicular to the surface over which the lava cooled. The direction of cooling can therefore be determined from the position of the columns.
Well-formed basalt columns display impressive regularity and geometric order, giving them a ‘naturally carved’ appearance.
These basalt columns were formed around 2.5 to 66 million years ago in the Tertiary period. The volcanism was triggered by plate movements that led to the stretching of the Earth's crust, particularly during the formation of the Alps. This created deep fracture systems and trench structures along which hot magma from the Earth's mantle could rise and reach the Earth's surface. This led to the formation of numerous volcanic areas, e.g. in the Upper Palatinate, the Rhön and the Vogelsberg, where the magma was often basaltic in nature.
______________________________________________________________________________________
Quellen
https://www.mineralienatlas.de/lexikon/index.php/Basalts%C3%A4ule
https://de.wikipedia.org/wiki/Basalt
https://www.vulkane.net/blogmobil/wiki/basaltsaeulen/
https://www.spektrum.de/magazin/wie-entstehen-basaltsaeulen/1496907