
Geologia
A história da Madeira começou há cerca de 20 milhões de anos com uma enorme erupção vulcânica subaquática. Durante eras, a atividade vulcânica contínua alimentou a ilha, formando-a camada a camada. A lava que escorria solidificou-se em vastas quantidades de basalto, que hoje constituem a base da ilha. A Madeira é essencialmente apenas a ponta visível de um gigantesco vulcão em escudo que emerge do fundo do mar. O Pico Ruivo, o seu ponto mais alto, atinge os 1862 metros. De acordo com os mapas geológicos, as camadas rochosas visíveis pertencem à Formação Funchal, parte do chamado "Complexo Vulcânico Superior" da Madeira.
As impressionantes formações rochosas no oceano, semelhantes a ilhas, são particularmente notáveis. Uma delas possui uma abertura natural, semelhante a uma janela, no seu topo — daí o nome do local (Janela). Estes pináculos rochosos são restos de rocha vulcânica mais dura que resistiu melhor à erosão da água do mar do que a rocha mais macia circundante.
História
A história da Ribeira da Janela está intimamente ligada ao povoamento geral da Madeira após a sua descoberta em 1419 pelos navegadores portugueses e à importância da zona para a agricultura e o abastecimento de água da ilha. A Madeira não tinha habitantes indígenas quando os portugueses a descobriram. O nome "Ribeira da Janela" deriva do rio com o mesmo nome, que desagua no Oceano Atlântico e é o curso de água mais extenso do interior da ilha. Os característicos pináculos rochosos (Ilhéus) ao largo da costa deram o nome ao local, uma vez que uma abertura natural no topo de uma destas rochas se assemelha a uma janela ("Janela"). A colonização da ilha iniciou-se oficialmente em 1425 por ordem do Rei D. João I.
Formação do Basalto
O basalto é uma rocha extrusiva, ou seja, forma-se quando a lava solidifica rapidamente à superfície. Por ser formado por atividade vulcânica, o basalto é classificado como uma rocha vulcânica. A forma mais conhecida de basalto é o basalto colunar. Estas colunas, na sua maioria hexagonais, formam-se durante o arrefecimento. Após a solidificação, o basalto desenvolve tensões devido ao arrefecimento e à consequente contracção (diminuição do volume). Estas tensões acabam por atingir um pico e a estrutura do basalto rompe. Nesta altura, formam-se as colunas, também maioritariamente hexagonais. À medida que o arrefecimento continua, os espaços entre as colunas aumentam. Além do basalto colunar, também se pode formar basalto nodular ou basalto em almofada. Isto ocorre quando a lava entra em erupção debaixo de água, por exemplo, no fundo do mar, ou quando a lava flui diretamente para um lago. Nestes casos, as colunas de basalto características não se formam, mas sim um agregado sólido. A água circundante faz com que a lava arrefeça mais rapidamente. A estrutura, neste caso, é de granulação mais fina do que no basalto colunar.
Propriedades do Basalto
O basalto arrefece rapidamente, resultando numa textura de grãos finos. A textura é tão fina que os cristais não são visíveis a olho nu. Podem ocorrer fenocristais visíveis. Geralmente, o basalto é preto, castanho ou cinzento claro a escuro. A rocha é considerada resistente à erosão e ao intemperismo. O basalto é mais duro do que a maioria das rochas sedimentares, mas mais mole do que, por exemplo, o granito.
O basalto é a rocha mais abundante. É o principal componente da crosta oceânica e continental. O basalto é utilizado, entre outras coisas, na construção de estradas, betão e diques, bem como na construção de caminhos-de-ferro.
Composição do Basalto
O basalto tem a mesma composição que o gabro. No entanto, ao contrário do basalto, o gabro é de grão grosso e cristaliza abaixo da superfície terrestre (rocha intrusiva), sendo, por isso, classificado como uma rocha plutónica.
O basalto é considerado uma rocha com baixo teor de dióxido de silício (SiO2). Outros componentes incluem óxidos de alumínio, óxido de ferro, óxido de cálcio, óxido de magnésio e óxido de sódio. Uma composição típica é a seguinte:
SiO2 em 50%
Al2O3 em 20%
FeO, CaO e MgO em 10% cada
Na2O em 5%
K2O em 0,3% a 2,5%
TiO2 e compostos de enxofre em pequenas quantidades.
Texturas
O basalto ocorre em diversas texturas:
Lisa (Basalto Afanítico)
Com inclusões esverdeadas ou avermelhadas, como a olivina (Basalto Amigdaloidal ou Basalto Porfirítico)
Com vesículas (Gás aprisionado durante o arrefecimento) (Basalto Vesicular)
No basalto afanítico, a superfície é lisa e o basalto não apresenta inclusões estranhas. O arrefecimento, neste caso, é tão rápido que os minerais não conseguem formar cristais.
O basalto amigdaloidal ou porfirítico apresenta uma granulação mais grossa que o basalto afanítico. Isto significa que a taxa de arrefecimento durante a sua formação foi mais lenta. Além desta textura, estão presentes inclusões. Os cristais podem ter feito parte da matriz ou os poros de gás podem ter sido preenchidos por minerais ao longo do tempo. As inclusões podem ser verdes ou avermelhadas. A sua granulação contrasta com a rocha circundante.
No basalto vesicular, o gás ficou aprisionado no interior da lava. Este gás pôde expandir-se quando a lava entrou em erupção. Ao mesmo tempo, a lava solidificou e a estrutura porosa congelou.
Tarefas para este Earthcache
Para registar este Earthcache, deve responder às seguintes perguntas e completar as tarefas no local:
1.º Dirija-se para o lado norte da rocha nas coordenadas indicadas. Aí encontrará uma grande protuberância arredondada na parte superior. A história geológica da ilha é claramente visível neste ponto. Descreva por palavras suas como essa protuberância foi formada.
2.º Agora vá para o lado oeste da rocha. Que textura de basalto encontra aqui?
3.º Agora vá para o lado sudeste da rocha. Aí encontrará uma formação de basalto impressionante. Descreva o formato desta formação por palavras suas.
4.º Publique uma fotografia sua, do seu dispositivo GPS ou de um item pessoal nas coordenadas no seu registo!
Por favor, envie as suas respostas preferencialmente através do Centro de Mensagens. O e-mail também é aceitável. Como sempre, pode registar a sua descoberta imediatamente após enviar as suas respostas.
Divirta-se com este Earthcache!
Fontes:
https://geodiversidade.madeira.gov.pt/
https://visitmadeira.com/
https://de.wikipedia.org/wiki/Basalt
https://rocks.comparenature.com/de/basalt-gestein/model-7-0
https://www.uni-giessen.de/de/fbz/fb09/institute/ilr/loek/bluegaerten_mit_heimischen_pflanzen/gestein_/basalt
https://www.scinexx.de/news/geowissen/raetsel-des-giants-causeway-geloest/
https://de.wikipedia.org/wiki/Gabbro

Geology
Madeira's history began around 20 million years ago with a massive underwater volcanic eruption. For eons, continuous volcanic activity fed the island, forming it layer by layer. The flowing lava solidified into vast quantities of basalt, which today form the island's foundation. Madeira is essentially just the visible tip of a gigantic shield volcano rising from the seabed. Pico Ruivo, its highest point, reaches 1,862 meters. According to geological maps, the visible rock strata belong to the Funchal Formation, part of Madeira's so-called "Upper Volcanic Complex" (CVS, "Complexo Vulcânico Superior"). The striking, island-like rock formations in the ocean are particularly noteworthy. One of these has a natural, window-like opening at its summit—hence the name of the place (Janela). These rock pinnacles are remnants of harder volcanic rock that has withstood erosion by seawater better than the surrounding softer rock.
History
The history of Ribeira da Janela is closely linked to the general settlement of Madeira after its discovery in 1419 by Portuguese seafarers and the area's importance for the island's agriculture and water supply. Madeira had no indigenous inhabitants when the Portuguese discovered it. The name "Ribeira da Janela" (translated as "Window River") derives from the river of the same name, which flows into the Atlantic Ocean here and is the longest watercourse in the island's interior. The striking rock pinnacles (Ilhéus) off the coast gave the place its name, as a natural opening at the top of one of these rocks resembles a window ("Janela"). The colonization of the island officially began in 1425 by order of King John I.
Formation of Basalt
Basalt is an extrusive rock, meaning it forms when lava solidifies rapidly on the surface. Because basalt is formed by volcanic activity, it is classified as a volcanic rock. The most well-known form of basalt is columnar basalt. These mostly hexagonal columns form during cooling. After solidification, the basalt develops stresses due to cooling and the resulting shrinkage (volume contraction). These stresses eventually reach a peak, and the basalt structure fails. At this point, the mostly hexagonal columns are formed. As the basalt cools further, the spaces between the columns widen. In addition to the familiar columnar basalt, nodular basalt or pillow basalt can also form. This occurs when the lava erupts underwater, for example, on the seabed, or when the lava flows directly into a lake. This process does not produce the familiar basalt columns, but rather a solid, interconnected structure. The surrounding water causes the lava to cool more quickly. The resulting texture is finer-grained than that of columnar basalt.
Properties of Basalt
Basalt cools rapidly, resulting in a fine-grained texture. The structure is so fine that crystals are not visible to the naked eye. Visible phenocrysts may be present. Basalt is generally black, brown, or light to dark gray. The rock is considered resistant to erosion and weathering. Basalt is harder than most sedimentary rocks, but softer than, for example, granite. Basalt is the most widespread rock. It is the main component of oceanic and continental crust. Basalt is used in various applications, including road construction, concrete and dike construction, and railway construction. Basalt is a highly distributed rock.
Composition of Basalt
Basalt has the same composition as gabbro. However, unlike basalt, gabbro is coarse-grained and crystallizes below the Earth's surface (intrusive rock), thus belonging to the plutonic rocks.
Basalt is considered a rock low in SiO2 (silicon dioxide). Other constituents include aluminum oxides, iron oxide, calcium oxide, magnesium oxide, and sodium oxide. A typical composition is as follows:
SiO2 approximately 50
Al2O3 approximately 20%
FeO, CaO, and MgO approximately 10% each
Na2O approximately 5%
K2O approximately 0.3% to 2.5%
TiO2 and sulfur compounds in small quantities.
Textures
Textures Basalt occurs in various textures:
Smooth (Aphanitic Basalt)
With greenish or reddish inclusions such as olivine (Amygdaloidal Basalt or Porphyritic Basalt)
With vesicles (Gas trapped during cooling) (Vesicular Basalt)
In aphanitic basalt, the surface is smooth and the basalt does not exhibit any foreign inclusions.
Cooling in this case is so rapid that minerals cannot form crystals.
Amygdaloidal or porphyritic basalt is coarser-grained than aphanitic basalt. This means that the cooling rate during its formation was slower. In addition to this texture, inclusions are present. These inclusions were either part of the groundmass or gas pores were filled with minerals over time. The inclusions can be green to reddish. Their graininess contrasts with the surrounding rock.
In vesicular basalt, gas was trapped in the lava. This gas could expand when the lava erupted. At the same time, the lava solidified, and the porous structure was frozen.
Tasks for this Earthcache
To log this Earthcache, you must answer the following questions and complete the tasks on site:
1. Go to the north side of the rock at the listed coordinates. Here you will find a large, round bulge in the upper area. The island's geological history is clearly visible at this point. Describe in your own words how this bulge formed.
2. Now go to the western side of the rock. What basalt texture do you find here?
3. Now go to the southeastern side of the rock. Here you will find a striking basalt formation. Describe the shape of this formation in your own words.
4. Post a photo of yourself, your GPS device, or a personal item at the coordinates in your log! Please send your answers preferably via the Messages Center. Email is also acceptable. As always, you may log your find immediately after submitting your answers.
Have fun with this Earthcache!
Sources:
https://geodiversidade.madeira.gov.pt/
https://visitmadeira.com/
https://de.wikipedia.org/wiki/Basalt
https://rocks.comparenature.com/de/basalt-gestein/model-7-0
https://www.uni-giessen.de/de/fbz/fb09/institute/ilr/loek/bluegaerten_mit_heimischen_pflanzen/gestein_/basalt
https://www.scinexx.de/news/geowissen/raetsel-des-giants-causeway-geloest/
https://de.wikipedia.org/wiki/Gabbro

Geologie
Die Geschichte Madeiras begann vor rund 20 Millionen Jahren mit einem gewaltigen Vulkanausbruch unter Wasser. Über Äonen hinweg speiste fortwährende vulkanische Aktivität die Insel und formte sie Schicht für Schicht. Die fließende Lava erstarrte zu riesigen Mengen Basalt, die heute das Fundament der Insel bilden. Madeira ist im Grunde genommen nur die sichtbare Spitze eines gigantischen Schildvulkans, der sich vom Meeresboden erhebt. Der Pico Ruivo ragt als höchster Punkt 1862 Meter in den Himmel. Die vor Ort sichtbaren Gesteinsschichten gehören laut geologischen Karten zur Funchal-Formation, einem Teil des sogenannten „Oberen Vulkanischen Komplexes“ (CVS, „Complexo Vulcânico Superior“) von Madeira.
Besonders auffällig sind die markanten, inselartigen Felsformationen im Ozean. Eine davon besitzt eine natürliche, fensterähnliche Öffnung an der Spitze – daher der Name des Ortes (Janela). Diese Felsnadeln sind Überreste von härterem Vulkangestein, das der Erosion durch das Meerwasser besser standgehalten hat als das umliegende weichere Gestein.
Geschichte
Die Geschichte von Ribeira da Janela ist eng verbunden mit der allgemeinen Besiedlung Madeiras nach ihrer Entdeckung im Jahr 1419 durch portugiesische Seefahrer und der Bedeutung des Gebiets für die Landwirtschaft und Wasserversorgung der Insel. Die Insel Madeira hatte keine Ureinwohner, als die Portugiesen sie entdeckten. Der Name "Ribeira da Janela" (übersetzt "Fensterfluss") leitet sich von dem gleichnamigen Fluss ab, der hier in den Atlantik mündet und der längste Wasserlauf im Inneren der Insel ist. Die markanten Felsnadeln (Ilhéus) vor der Küste gaben dem Ort seinen Namen, da eine natürliche Öffnung an der Spitze eines dieser Felsen an ein Fenster erinnert ("Janela"). Die Kolonisierung der Insel begann offiziell 1425 auf Anweisung von König Johann I.
Entstehung von Basalt
Basalt ist ein Ergussgestein, d.h. es entsteht, wenn Lava an der Oberfläche schnell erstarrt. Da Basalt durch vulkanische Aktivitäten entsteht, gehört es zu den Vulkaniten. Die bekannteste Form des Basalts ist die des Säulenbasalts. Diese meist sechseckigen Säulen entsteht beim Abkühlen. Nach dem Erstarren bauen sind in dem Basalt durch die Abkühlung und der dadurch vorkommenden Schrumpfung (Volumenkontraktion) Spannungen auf. Diese erreichen schließlich einen Höhepunkt und das Gefüge des Basalts versagt. In diesem Moment bilden sich die größtenteils sechseckigen Säulen. Mit dem weiteren abkühlen vergrößern sich die Zwischenräume der Säulen. Neben den bekannten Säulen kann auch Kugelbasalt oder Kissenbasalt entstehen. Das geschieht, wenn die Lava unter Wasserbedeckung, bspw. auf dem Meeresgrund austritt oder die Lava fließt direkt in einen See. Hierbei entstehen nicht die bekannten Basaltsäulen, sondern ein fester Verbund. Durch das umgebende Wasser kühlt die Lava schneller aus. Das Gefüge ist hier feinkörniger als beim Säulenbasalt.
Eigenschaften von Basalt
Basalt kühlt schnell ab, dadurch entsteht ein feinkörniges Gefüge. Das Gefüge ist so klein, dass Kristalle mit dem bloßen Auge nicht erkennbar sind. Sichtbare Einsprenglinge können vorkommen. Im Allgemeinen ist Basalt schwarz, braun, hell- bis dunkelgrau. Das Gestein gilt als beständig gegenüber Erosion und Verwitterung. Basalt ist härter als die meisten Sedimentgesteine, aber weicher als bspw. Granit.
Basalt ist das Gestein mit der größten Verbreitung. Der Hauptbestandteil der ozeanischen und kontinentalen Kruste ist Basalt. Verwendung findet Basalt u.a. im Straßen-, Beton- und Deichbau, sowie im Gleisbau.
Zusammensetzung von Basalt
Basalt hat die gleiche Zusammensetzung wie Gabbro. Gabbro ist, aber anders als der Basalt, grobkörnig und kristallisiert unter der Erdoberfläche (Tiefengestein) und gehört dadurch zu den Plutoniten.
Basalt gilt als SiO2 (Siliziumdioxid) armes Gestein. Weitere Bestandteile sind Aluminiumoxide, Eisenoxid, Calciumoxid, Magnesiumoxid und Natriumoxid. Eine typische Zusammensetzung sieht wie folgt aus:
SiO2 um 50 %
Al2O3 um 20 %
FeO, CaO und MgO jeweils um 10 %
Na2O um 5 %
K2O um 0,3 % bis 2,5 %
TiO2 und Schwefelverbindungen in kleinen Mengen.
Texturen
Basalt kommt in verschiedenen Texturen vor:
Glatt (Aphanitischer Basalt)
Mit grünlichen oder rötlichen Einschlüssen wie Olivin (Amygdaloidaler Basalt oder Porphyritischer Basalt)
Mit Blasen (Eingeschlossene Gase bei der Abkühlung) (Vesikulärer Basalt)
Beim aphanitischen Basalt ist die Oberfläche glatt und der Basalt zweigt keine Fremdeinschlüsse. Die Abkühlung ist in diesem Fall so schnell, dass sich keine Minerale zu Kristallen bilden können.
Amygdaloidaler Basalt oder porphyritischer Basalt ist grobkrniger als aphanitischen Basalt. D.h. die Abkühlgeschwindigkeit ist bei der Entstehung geringer gewesen. Neben dieser Textur sind hier Einschlüsse vorhanden. Entweder sind die Kristalle Bestandteil der Grundmasse gewesen, oder Gasporen wurden mit der Zeit durch Mineralien gefüllt. Die Einschlüsse können grün bis rötlich sein. Sie heben sich von Ihrer Körnigkeit von der Umgebung ab.
Bei vesikulärer Basalt war Gas in der Lava gebunden. Dieses Gas konnte sich beim Austritt der Lava ausdehnen Gleichzeitig erstarrte die Lava und die porige Struktur wurde eingefroren.
Aufgaben für diesen Earthcache
Um diesen Earthcache zu loggen, musst du die folgenden Fragen und Aufgaben vor Ort beantworten:
1.Gehe zur Nordseite des Felsen zu den Listingkoordinaten.Hier findest du eine große runde Beule im oberen Bereich. Die Entstehungsgeschichte der Insel ist an dieser Stelle deutlich zusehen. Beschreibe mit eigenen worten wie diese Beule entstanden ist.
2.Gehe nun zur westlichen Seite des Felsens. Welche Basalt Textur findest du hier vor?
3.Gehe nun zur südöstlichen Seite des Felsens.Hier findest du eine auffällige Basaltformation. Beschreibe die Form dieser Formation mit eigenen worten.
4.Poste ein Foto von dir oder deinem deinem GPS oder persönlichen Gegenstand an den Koordinaten im Log!
Bitte sende deine Antworten vorzugsweise über das Nachrichten Center. E-Mail geht auch. Wie immer darfst du nach Absenden deiner Antworten sofort loggen.
Ich wünschen euch viel Spaß mit diesem Earthcache!
Quellenangaben:
https://geodiversidade.madeira.gov.pt/
https://visitmadeira.com/
https://de.wikipedia.org/wiki/Basalt
https://rocks.comparenature.com/de/basalt-gestein/model-7-0
https://www.uni-giessen.de/de/fbz/fb09/institute/ilr/loek/bluegaerten_mit_heimischen_pflanzen/gestein_/basalt
https://www.scinexx.de/news/geowissen/raetsel-des-giants-causeway-geloest/
https://de.wikipedia.org/wiki/Gabbro