THIS CACHE IS NOT AT THE POSTED COORDINATES!
⚡ OH NO! The Power is Out!
You’re standing in the entryway of an old house, and oh man… it’s dark!
The lights are out, the air smells faintly of ozone, and the breaker box is humming in a way that probably isn’t normal.
Somewhere around here is the building’s control circuitry — maybe if you can get it working again, the lights (and the coordinates) will come back on.
Sorry, I couldn’t resist. 😉
Let’s take a look inside the control panel and see if we can get this place powered up again…
🔧 Step 1 — AB.CD
The resistor network is the first thing you spot.
It looks simple enough — until you realize the circuit twists and loops like a maze.
Follow the flow of current and decode the color bands to find A–D.
🔌 Step 2 — E & F
“The control box has gone haywire!”
Two wires (E and F) have come loose and tangled with everything else.
Follow each line carefully from the left to find which numbered terminal it connects to on the right.
The numbers you end on are E and F in your coordinates.
Be careful not to short-circuit your brain.
💡 Step 3 — G & H
The breaker panel flickers to life.
You see a bunch of buttons, but which one to press? Let's read the owner's manual and see.
Whichever button makes the red LED light up, and the RGB turn red is the answer! — Its number gives you G H.
🔴 Step 4 — I & J
The diagnostic board fires up and flashes a binary signal across the display:
00110001 00110110 00001010
Decode the message to uncover I J.
⚙️ Step 5 — Bring It All Together
Once you’ve repaired every step, you’ll have all the digits needed to restore power to the house — and locate the final cache.
N 30° 31′ AB.CD″
W 096° EF′ GH.IJ″
Flip the final switch, bring the lights back online, and enjoy the satisfaction of a job well done, technician.