This was the highlight of my visit to Thailand - visiting the indigenous Hill Tribes. The added bonus was seeing some amazing geology in the process.
I hope you enjoy this Earthcache and the geological lesson! The difficulty rating reflects accessing the area of the EC.
From Wikipedia - a brief explanation of the geological history of the area of Northern Thailand: The Shan–Thai or Sibumasu Terrane is a mass of continental crust extending from Tibet into Southeast Asia sharing a similar geological history. The Shan–Thai Terrane rifted from Australia in the Permian and collided with the Indochina terrane in the Triassic. It extends from Malaysia, through peninsular Thailand, Myanmar, West Yunnan, to Lhasa.
Shan–Thai is c. 4,000 km (2,500 mi) long and bounded by the Indochina terrane to the east and the South Chine terrane to the north. It is one of a series of continental blocks or terranes that were rifted off eastern Gondwana during the Ordovician (495 to 443 Ma), long before the formation of Pangaea. Today these blocks form south-east Asia but the different timing of their journeys has given them distinct geologic histories.
Shan–Thai was an archipelago on the Paleo-Tethys Ocean spread over several latitudes. It can therefore be subdivided into several portions with different palaeo-geographical histories. The internal "Thai" elements, bordering the Indochina block, are of Cathaysian type and characterised by palaeo-tropical warm-water facies. Facies are a body of rock with specified characteristics, which can be any observable attribute of rocks (such as their overall appearance, composition, or condition of formation), and the changes that may occur in those attributes over a geographic area. It is the sum total characteristics of a rock including its chemical, physical, and biological features that distinguishes it from adjacent rock.
The collision between India and Eurasia during the Oligocene and Miocene resulted in clockwise rotation of south-west Asia, severe deformation of south-east Asia, and the extrusion of Shan–Thai and Indochina blocks. These two blocks are still crisscrossed by the faults from this collision.
The Science:
Let’s begin with some geological basics. There are 3 main types of rocks: igneous, metamorphic and sedimentary.
Igneous rocks are formed through volcanic processes, and have solidified from a molten state. The Earth is believed to have been entirely molten in its early stages of development. Hence, all other rock types are derivatives of igneous rocks. There are two types of Igneous rocks:
Plutonic/intrusive: Rock from magma rising up from deep under the earth's crust, and solidifies as it cools before it reaches the earth's surface. Examples include granite and gabbro.
Volcanic/extrusive: Rock that was originally lava, hot magma that reached (or exploded from) the surface of the earth before it hardened. Examples include basalt and obsidian.
Metamorphic rocks are formed from sedimentary rocks that are transformed over time. This can result from extreme pressure, temperature and chemical activity. Examples include marble and slate. Metamorphic rocks can be foliated such as gneiss, phyllite, schist, and slate, which have a layered or banded appearance that is produced by exposure to heat and directed pressure. Non-foliatedmetamorphic rocks such as hornfels, marble, quartzite, and novaculite do not have a layered or banded appearance.
Sedimentary rocks are formed by the accumulation of particles on or near the Earth's surface, and compacted down, often under extreme pressure, creating rock layers. There are three main types of sedimentary rocks: mudstone, sandstone, and limestone.
Useful Vocabulary:
In order to help with your descriptions, here is some geological terminology that you may find useful to incorporate into your responses:
Cross-beds or "sets" are the groups of inclined layers, which are known as cross strata. Cross-bedding forms during deposition on the inclined surfaces of bedforms such as ripples and dunes; it indicates that the depositional environment contained a flowing medium (typically water or wind).
In geology, a graded bed is one characterized by a systematic change in grain or clast size from one side of the bed to the other. Most commonly this takes the form of normal grading, with coarser sediments at the base, which grade upward into progressively finer ones.
Fine-grained textures generally indicate magmas that rapidly cooled at or near the Earth's surface. Fast cooling prevents crystals from growing very large. The cutoff between fine- and coarse-grainedtextures is about 1 mm. This terminology relates to igneous rocks.
Colour: colour observed in a mineral sample in white light. With experience, colour can be one of the most valuable of diagnostic properties.
Hardness: the ability of a mineral to resist abrasion or scratching. Measured on a relative scale from 1 - 10 known as Mohs' Scale in which minerals of higher number scratch those of lower numbers. For simple field determinations, a fingernail has an hardness of about 2.5 and the blade of a penknife about 5 - 5.5.
Inclusion: a solid fragment, liquid globule, or pocket of gas enclosed in a mineral or rock; an inclusion is older than the rock in which it's found and is a method of relative dating. Vein: a distinct sheet-like body of crystallized minerals within a rock.
Lustre: the characteristic appearance of a mineral in reflected light, e.g., metallic, pearly, earthy, greasy, etc.
Form: the external appearance of a mineral or aggregates of the mineral, e.g., crystalline, fibrous, stalactitic, dendritic (plant-like), etc.
Cleavage and Fracture: the way that the mineral breaks; if it breaks along planar surfaces related to the crystal structure it is said to show cleavage, but if it breaks irregularly is said to show fracture.
Weathering: the disintegration of rocks on the Earth's surface by the action of rain, frost, heat, wind, etc
***
In order to log the find, please send me the responses to the following questions. Q4 is particularly important and should not be ignored.
Questions:
1. a) Looking at the structure in front of you, describe the type of rock you see (use the vocabulary list, above, in your response). What colours do you see? What textures? Any patterns?
b) Which of the 3 main rock types is it an example of?
c) What evidence is there to support your answer for 1b?
2. Looking at the geology in front of you, estimate the range of height in meters from lowest to high. What is the elevation at GZ?
3. Look at the mountains and describe the vegetation you see. Why do you think this type of vegetation is prevalent on the mountain?
4. Now, to determine you were actually at GZ, name 1 of the 2 types of common (local) vegetation at GZ (on the road, not the mountain).
5. Send me - directly do not post - a photo of you / your GPS at GZ. This is to determine that you were actually on site.
Please ensure that you send your answers when logging a find. Posted logs without the accompanying correct answers will be removed. If you post a find without sending the answers, I will reach out and remind you to send them, but will delete found posts thereafter if the correct answers are not sent.
***
มันขับรถมานานจากเชียงใหม่ แต่เป็นรถที่วิเศษ เมื่อฉันใกล้จะสิ้นสุดการเดินทางฉันได้เห็นธรณีวิทยาที่ยอดเยี่ยม ความยากลำบากสะท้อนให้เห็นถึงการเข้าสู่ EC นี้ ฉันหวังว่าคุณจะสนุกกับสถานที่และบทเรียนด้วยเช่นกัน จากวิกิพีเดีย - คำอธิบายโดยย่อเกี่ยวกับประวัติทางธรณีวิทยาของพื้นที่ภาคเหนือของประเทศไทย: Shan-Thai หรือ Sibumasu Terrane เป็นเปลือกโลกทวีปที่แผ่ขยายจากทิเบตไปสู่เอเชียตะวันออกเฉียงใต้ซึ่งมีประวัติศาสตร์ทางธรณีวิทยาคล้าย Terrane Shan - Thai ระห่างจากออสเตรเลียใน Permian และชนกับ Terrane อินโดจีนใน Triassic มันยื่นออกมาจากมาเลเซียผ่านทางคาบสมุทรไทยพม่าตะวันตกยูนนานไปจนถึงลาซา ฉาน - ไทยคือค. ยาว 4,000 กิโลเมตร (2,500 ไมล์) และล้อมรอบด้วย terrane อินโดจีนไปทางทิศตะวันออกและ terrane ใต้ Chine ไปทางทิศเหนือ มันเป็นหนึ่งในชุดของทวีปบล็อกหรือ terranes ที่แตกออกไปทางทิศตะวันออก Gondwana ระหว่างออร์โดวิเชียน (495 ถึง 443 แม่) นานก่อนการก่อตัวของ Pangea ทุกวันนี้บล็อกเหล่านี้ก่อตัวขึ้นในเอเชียตะวันออกเฉียงใต้ แต่ช่วงเวลาที่แตกต่างกันในการเดินทางของพวกเขาทำให้พวกเขามีประวัติศาสตร์ทางธรณีวิทยาที่แตกต่างกัน Shan – Thai เป็นหมู่เกาะในมหาสมุทร Paleo-Tethys ที่แผ่กระจายไปทั่วละติจูดหลายแห่ง มันสามารถแบ่งย่อยออกเป็นหลายส่วนที่มีประวัติทางภูมิศาสตร์แบบพาเลโอที่แตกต่างกัน องค์ประกอบ "ไทย" ภายในที่ล้อมรอบบล็อกอินโดจีนเป็นประเภท Cathaysian และโดดเด่นด้วย facae น้ำร้อนเขตร้อน Palaeo ใบหน้า เป็นร่างกายของหินที่มีลักษณะเฉพาะซึ่งสามารถเป็นคุณลักษณะที่สังเกตได้ของหิน (เช่นลักษณะโดยรวมองค์ประกอบหรือสภาพการก่อตัว) และการเปลี่ยนแปลงที่อาจเกิดขึ้นในคุณลักษณะเหล่านั้น พื้นที่ทางภูมิศาสตร์ เป็นผลรวมทั้งหมดของหินรวมถึงคุณสมบัติทางเคมีกายภาพและชีวภาพที่แตกต่างจากหินที่อยู่ติดกัน การปะทะกันระหว่างอินเดียกับยูเรเซียระหว่าง Oligocene และ Miocene ทำให้เกิดการหมุนตามเข็มนาฬิกาของเอเชียตะวันออกเฉียงใต้, การเสียรูปที่รุนแรงของเอเชียตะวันออกเฉียงใต้ สองช่วงตึกเหล่านี้ยังคงถูกตัดทิ้งโดยความผิดพลาดจากการปะทะกันนี้ วิทยาศาสตร์: เริ่มต้นด้วยพื้นฐานทางธรณีวิทยา หินมี 3 ประเภทหลักคือหินอัคนี, หินแปรและหินตะกอน Igneous หินเกิดขึ้นจากกระบวนการภูเขาไฟและแข็งตัวจากสถานะหลอมเหลว เชื่อว่าโลกมีการหลอมเหลวอย่างสมบูรณ์ในช่วงแรกของการพัฒนา ดังนั้นหินประเภทอื่นทั้งหมดจึงเป็นอนุพันธ์ของหินอัคนี หินอัคนีมีสองประเภท: Plutonic / ก้าวก่าย : หินจากหินหนืดที่ลอยขึ้นมาจากส่วนลึกใต้เปลือกโลกและแข็งตัวเมื่อมันเย็นตัวลงก่อนที่มันจะถึงพื้นผิวโลก ตัวอย่างเช่น หินแกรนิตและ gabbro ภูเขาไฟ / การรุกล้ำ : หินที่ แต่เดิมเป็นลาวาแมกมาร้อนที่มาถึง (หรือระเบิดจาก) พื้นผิวของโลกก่อนที่จะแข็งตัว ตัวอย่าง ได้แก่ หินบะซอลต์และภูเขาไฟ obsidian ในทางธรณีวิทยา felsic หมายถึงหินอัคนีที่ค่อนข้างอุดมไปด้วยธาตุที่เป็นเฟลด์สปาร์และควอตซ์ มันเปรียบเทียบกับหิน mafic </ strong> ซึ่งค่อนข้างสมบูรณ์ยิ่งขึ้นในแมกนีเซียมและเหล็ก \ หินแปร เป็นหินที่เกิดจากหินตะกอนซึ่งเปลี่ยนรูปตามกาลเวลา ซึ่งอาจเป็นผลมาจากแรงดันอุณหภูมิและกิจกรรมทางเคมีที่รุนแรง ตัวอย่างเช่นหินอ่อนและหินชนวน หินแปรสามารถ foliated เช่น gneiss , ไฟต์ไลต์ , เชสต์ และ กระดานชนวน, </ strong > ซึ่งมีลักษณะเป็นชั้นหรือแถบที่เกิดจากการสัมผัสกับความร้อนและความดันที่กำหนด หินแปรที่ไม่ใช่ foliated หินแปรเช่น hornfels , หินอ่อน , quartzite และโนวาคูไลท์ไม่มีชั้นหรือแถบสี ลักษณะ. </ p> หินตะกอน เกิดจากการสะสมของอนุภาคบนหรือใกล้พื้นผิวโลกและถูกอัดลงซึ่งมักจะอยู่ภายใต้ความกดดันสูงสร้างชั้นหิน หินตะกอนมีสามประเภทหลัก: โคลนหินทรายหินทราย และ หินปูน หินตะกอน เกิดจากการสะสมของอนุภาคบนหรือใกล้พื้นผิวโลกและถูกอัดลงซึ่งมักจะอยู่ภายใต้แรงกดดันสูงทำให้เกิดชั้นหิน หินตะกอนมีสามประเภทหลัก: โคลนหินทรายหินทราย และ หินปูน คำศัพท์ที่มีประโยชน์: เพื่อช่วยในการอธิบายของคุณนี่เป็นคำศัพท์ทางธรณีวิทยาที่คุณอาจพบว่ามีประโยชน์ในการรวมเข้ากับคำตอบของคุณ: ข้าม - เตียง หรือ "ชุด" เป็นกลุ่มของเลเยอร์เอียงซึ่งเป็นที่รู้จักในชื่อ ข้าม ชั้น ไขว้ - รูปแบบ ชุดเครื่องนอน ระหว่างการทับถมบนพื้นผิวที่เอียงของ bedforms เช่นระลอกคลื่นและเนินทราย มันแสดงให้เห็นว่าสภาพแวดล้อมแบบฝากมีสื่อที่ไหล (โดยทั่วไปคือน้ำหรือลม) ในทางธรณีวิทยา เตียงนอนอย่างช้าๆ เป็นลักษณะหนึ่งที่มีการเปลี่ยนแปลงอย่างเป็นระบบในขนาดเกรนหรือขนาดของ clast จากด้านหนึ่งของเตียง โดยทั่วไปจะใช้รูปแบบของการให้คะแนนปกติกับตะกอนหยาบที่ฐานซึ่งเกรดขึ้นเป็นคนปลีกย่อยขึ้นเรื่อย ๆ ดี - พื้นผิว เม็ดเล็ก โดยทั่วไปจะระบุ magmas ที่เย็นลงอย่างรวดเร็วที่หรือใกล้พื้นผิวโลก การระบายความร้อนอย่างรวดเร็วช่วยป้องกันไม่ให้ผลึกโตขึ้นมาก ทางลัดระหว่าง ละเอียด - และหยาบ - พื้นผิว หยาบ คือประมาณ 1 มม. คำศัพท์นี้เกี่ยวข้องกับหินอัคนี สี: สีที่พบในตัวอย่างแร่ในแสงสีขาว ด้วยประสบการณ์สีสามารถเป็นหนึ่งในคุณสมบัติการวินิจฉัยที่มีค่าที่สุด ความแข็ง: ความสามารถของแร่ในการต้านทานการขีดข่วนหรือการขีดข่วน วัดจากมาตราส่วนสัมพัทธ์ 1-10 รู้จักกันในชื่อ Mohs 'Scale ซึ่งแร่ธาตุที่มีจำนวนสูงกว่านั้นจะทำการขูดขีดจำนวนที่ต่ำกว่า สำหรับการหาค่าฟิลด์อย่างง่ายเล็บมือมีความแข็งประมาณ 2.5 และใบมีดมีดประมาณ 5 - 5.5 การรวม: ชิ้นส่วนของแข็งทรงกลมเหลวหรือกระเป๋าของก๊าซที่อยู่ในแร่หรือหิน การรวมนั้นเก่ากว่าหินที่พบและเป็นวิธีการหาคู่ที่สัมพันธ์กัน หลอดเลือดดำ: ร่างกายที่เหมือนแผ่นที่แตกต่างจากแร่ธาตุที่ตกผลึกภายในหิน ความมันวาว: ลักษณะที่ปรากฏของแร่ธาตุในแสงสะท้อนเช่นโลหะ, ไข่มุก, ดิน, เลี่ยน, ฯลฯ แบบฟอร์ม: การปรากฏตัวภายนอกของแร่หรือมวลรวมของแร่เช่นผลึก, เส้นใย, หินย้อย, หินย้อย, dendritic (เหมือนพืช) ฯลฯ ความแตกแยกและการแตกหัก: วิธีที่แร่แตกตัว ถ้ามันสลายไปตามพื้นผิวระนาบที่เกี่ยวข้องกับโครงสร้างผลึกมันบอกว่าจะแสดงความแตกแยก แต่ถ้ามันแตกผิดปกติจะมีการกล่าวเพื่อแสดงการแตกหัก การผุกร่อน: การสลายตัวของหินบนพื้นผิวโลกโดยการกระทำของฝนน้ำแข็งความร้อนลมและอื่น ๆ
***
คำถาม: </ strong> </ p>
1 a) ดูโครงสร้างด้านหน้าของคุณอธิบายประเภทของหินที่คุณเห็น (ใช้รายการคำศัพท์ด้านบนในการตอบกลับของคุณ) คุณเห็นสีอะไร พื้นผิวอะไร รูปแบบใดบ้าง
b) หินชนิดใดใน 3 ประเภทที่เป็นตัวอย่าง?
c) มีหลักฐานอะไรบ้างที่จะสนับสนุนคำตอบของคุณที่มีต่อ 1b
2 ดูธรณีวิทยาด้านหน้าคุณประเมินช่วงความสูงเป็นเมตรจากต่ำสุดถึงสูง ระดับความสูงของ GZ คืออะไร
3 ดูภูเขาและบรรยายพืชพรรณที่คุณเห็น ทำไมคุณถึงคิดว่าพืชประเภทนี้แพร่หลายบนภูเขา
4 ทีนี้เพื่อดูว่าคุณอยู่ที่ GZ จริง ๆ แล้วชื่อ 1 ใน 2 ชนิดของพืช (ท้องถิ่น) ทั่วไปที่ GZ (บนถนนไม่ใช่ภูเขา)
5. ส่งโดยตรง - อย่าโพสต์ - รูปถ่ายของคุณ / GPS ของคุณที่ GZ นี่คือการตรวจสอบว่าคุณอยู่ในไซต์จริง
คุณสามารถโพสต์รูปภาพของตัวคุณเอง / GPS ของคุณที่บริเวณโดยรอบ GZ แต่ไม่ใช่ที่ GZ รูปภาพที่แสดง GZ จะถูกลบ แน่นอนว่าภาพถ่ายไม่จำเป็นต้องมี…. เนื่องจากอยู่ในสถานที่เพื่อให้ EC สมบูรณ์