Ripropongo la cache GC9Q3HH che ho dovuto abbandonare a causa di una posizione "compromessa". Stessa cache, stesso funzionamento.
NFC (near-field communication), è una tecnologia di ricetrasmissione a corto raggio (fino a un massimo di 10 cm).
NFC è un particolare protocollo RFID (Radio Frequency IDentification), molto diffuso grazie alla possibilità di utilizzare tag passsivi.
Il lettore emette un campo magnetico che tramite il processo della induzione genera nell'antenna del tag una corrente indotta che alimenta il chip. Il chip così alimentato comunica tutte le informazioni contenute al lettore, sotto forma di un segnale radio ad una frequenza che si aggira intorno ai 13,56 MHz
Un chip può contenere diverse informazioni: da un semplice campo di testo a pochi megabyte di dato, sufficenti a contenere le coordinate del final ed un link allo spoiler.
In generale abbiamo a che fare con la tecnologia RFID quotidianamente, fra i più comuni usi notiamo le carte di credito contactless, i biglietti del pullman (quelli della GTT sono tutti contactless dal 2018 circa), i sistemi telepass ed i badge.
Stranamente (almeno a parer mio) vi è uno scarso utilizzo della tecnologia NFC nel geocaching.
Ma come si legge un tag NFC e come trovo la cache?
I tag possono essere di dimensioni molto ridotte non necessitando ne di batteria ne di antenne potenti, ne esitono di piccoli quanto una moneta da 5 centesimi.Leggerli è molto semplice, tutti gli smartphone “recenti” possiedono un lettore NFC, basta abilitarlo dal menù impostazioni e avvicinare lo smartphone al tag; l’ avvenuta lettura sarà accompagnata da un “bip” e sullo schermo appariranno le informazioni contenute nel tag.
Quindi cerca un piccolo oggetto nascosto (non preoccuparti, quando lo vedrai capirai subito che è ciò che stavi cercando), avvicina il tuo telefono e leggi le coordinate della cache finale.
Quasi tutti i dispositivi hanno l’antenna posizionata nella parte superiore del telefono.
[English]
NFC (near-field communication) is a short-range transponder technology (up to 10 cm).
NFC is a particular RFID (Radio Frequency Identification) protocol, widespread thanks to the possibility of using passive tags. The reader emits a magnetic field that through induction generates an induced current in the antenna of the tag and powers the chip in it. The chip communicates all the information it contains to the reader by the medium of a radio signal around 13.56 MHz.
A chip may contain various information: starting from a simple written text, up to a few magabytes of data, enough to store the coordinates of the final and a link to the spoiler.
Generally speaking we use RFID technology on a daily basis, among the most common usage of this technology we can think of conctactless credit card payments, bus tickets ( here in Turin they’ve been conctactless since 2018 more or less.) , telepass systems and badges.
Oddly enough, if you ask me, it is not as common to see this technology applied to geocaching.
Anyways, how do you read a NFC tag and how can you find the cache?
The tags may be quite small in size since they don’t need a battery or powerfull antennas, in fact some are only as big as a 5 cents coin. Reading them is quite simple. All the smartphones produced “recently” have a built-in NFC reader, you only need to turn it on in the settings and get your phone close to the tag. You will know that the reading is done when you’ll hear a “beep” and all the informations of the tag will appear on your screen.
So, look for a small hidden object (no worries, you’ll recognise it as soon as you’ll see it), then get your phone closer to it and read the coordinates for the final cache.
Pretty much all phones have the reading antenna mounted on the upper part of the phone.