GCZV0H Artisan or Artesian? (Earthcache) in Indiana, United States created by bluegillfisherman

This cache has been archived.

Geocaching HQ Admin: It has now been over 30 days since Geocaching HQ submitted the disabled log below and, unfortunately, the cache owner has not posted an Owner maintenance log and re-enabled this geocache. As a result, we are now archiving this cache page.

More information in the Help Center

GCZV0H ▼

A cache by bluegillfisherman Message this owner

Hidden : 12/15/2006

Difficulty:

Terrain:

Size: Size: not chosen (not chosen)

Join now to view geocache location details. It's free!

Watch

How Geocaching Works

Please note Use of geocaching.com services is subject to the terms and conditions in our disclaimer.

Geocache Description:

This cache will take you to an artesian well along the roadside. Many people, for many years, have obtained drinking water from this unique source. Bring along some extra containers and give it a try for yourself. Relatives of mine, atop the hill, have recently installed a tiny “boardwalk” across the drainage ditch to keep your feet dry. Enjoy the water. bgf

Artesian Systems
The word artesian comes from the French town and province of Artois (called Artesium during Roman times) near Calais, where the first European artesian well was drilled in A.D. 1126, by Carthusian monks, and is still flowing today.
The term artesian can be applied to any system in which groundwater is confined and builds up high hydrostatic (fluid) pressure. Water in such a system is able to rise above the level of the aquifer if a well is drilled through the confining layer (aquiclude), thereby reducing the pressue and forcing the water upward.
For an artesian system to develop, three geologic conditions must be present.
1.the aquifer must be confined above and below to prevent water from escaping
2.the rock sequence is usually tilted and exposed at the surface, enabling the aquifer to be recharged
3.there is suffient precipitation in the recharge zone to keep the aquifer filled
The elevation of the water table in the recharge area and the distance of the well head from the recharge area determine the height to which artesian water rises in a well. The surface defined by the water table in the recharge area, called the artesian-pressure surface, is indicated by the sloping dashed line in the figure.
Image Hosted by ImageShack.us

Image
An artesian well will flow freely at the ground surface only if the wellhead is at an elevation below the artesian pressure surface. In this situation, the water flows out of the well because it rises toward the artesian-pressure surface, which is at a higher elevation than the wellhead.

In addition to artesian wells, many artesian springs also exist. Such springs can occur if a fault or fracture intersects the aquifer allowing water to rise above the aquifer. Because the geologic conditions necessary for artesian water can occur in a variety of ways, artesian systems are quite common in many areas of the world underlain by sedimentary rock.

To log this cache, you will need to bring along a timing device and a widemouth container of known volume. Measure the rate of water flow from the well. Gallons, quarts, litres per minute...your choice. Email me your answer, when you log your find. This requirement must be met.

Additional Hints (Decrypt)

[Photos encouraged]

Decryption Key

A|B|C|D|E|F|G|H|I|J|K|L|M
-------------------------
N|O|P|Q|R|S|T|U|V|W|X|Y|Z

(letter above equals below, and vice versa)

This cache has been archived.

Watch

Geocache Description:

Attributes

Inventory

Bookmark Lists

Artisan or Artesian? EarthCache

This cache has been archived.

Watch

Geocache Description:

Attributes

Inventory

Bookmark Lists

Treasures